Finally I bought my first rpi and installed pCP. I need some help with the simple task to get analog audio working via the 3.5mm jack.
I connected pCP to my existing LMS using the default squeezelite settings (/usr/local/bin/squeezelite -n piCorePlayer -o hw:CARD=ALSA -a 80 1). It worked once after a few reboots, but after some more reboots (I installed LMS on pCP in the meantime) it doesn't work anymore.
On Diagnostics->Sound I can hear the left&right channels, but otherwise there's no sound. I tried with squeezelite loglevel output=debug and there are lots of errors "output_thread:764 start error: File descriptor in bad state". I tried some other output settings like default or sysdefault:CARD=ALSA and updated squeezelite from 1.9.6 to 1.9.7-1270-pCP without any change.
Any ideas what I probably missed to configure?
I connected pCP to my existing LMS using the default squeezelite settings (/usr/local/bin/squeezelite -n piCorePlayer -o hw:CARD=ALSA -a 80 1). It worked once after a few reboots, but after some more reboots (I installed LMS on pCP in the meantime) it doesn't work anymore.
On Diagnostics->Sound I can hear the left&right channels, but otherwise there's no sound. I tried with squeezelite loglevel output=debug and there are lots of errors "output_thread:764 start error: File descriptor in bad state". I tried some other output settings like default or sysdefault:CARD=ALSA and updated squeezelite from 1.9.6 to 1.9.7-1270-pCP without any change.
Any ideas what I probably missed to configure?
