I've got a new Pi zero, and a recently downloaded piCorePlayer. It's working fine with Ethernet, but the wireless isn't showing up. I'm not sure how best to debut, as e.g. iwconfig is not present. All the debug output I can think of is below. Any suggestions? I've done a similar setup on a Model 3B without trouble. I've also tried with a USB WiFi adapter (from the Pi Hut, several years old) without success.
piCorePlayer version is:
Code:
> cat /proc/cpuinfo
processor : 0
model name : ARMv6-compatible processor rev 7 (v6l)
BogoMIPS : 1138.45
Features : half thumb fastmult vfp edsp java tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xb76
CPU revision : 7
Hardware : BCM2835
Revision : 9000c1
Serial : 000000006ea9a012
Model : Raspberry Pi Zero W Rev 1.1Code:
> ifconfig
eth0 Link encap:Ethernet HWaddr 00:E6:99:00:0C:89
inet addr:192.168.178.207 Bcast:192.168.178.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:513 errors:0 dropped:106 overruns:0 frame:0
TX packets:257 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:104057 (101.6 KiB) TX bytes:44350 (43.3 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)Code:
#piCorePlayer version
PCPVERS="piCorePlayer 7.0.0"
WWW_BUILD: 00011Code:
> lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 005: ID 148f:5370
Bus 001 Device 003: ID 0fe6:9900
Bus 001 Device 002: ID 214b:7250
Bus 001 Device 004: ID 1a86:e2e3